The Call Rerouting First Alternatives form is used to specify the routing information for the first alternative rerouting. The routing information is defined based on:
the condition at the called number that caused rerouting (busy/do not disturb, or no answer) and
the device from which the call originated (DID trunk, tie trunk, CO trunk, or internal call).
Use this form for the following tasks:
Parameter |
Description |
Default Value |
First Alternative Number |
System-generated, protected field. Contains the list of first alternative numbers. The maximum first alternative number for each system is 336. |
|
Busy/DND DID |
Set the call routing when the called DID number is busy or has set Do Not Disturb. Select "Normal" to allow the system to route the call to busy or reorder tone, "This" to route the call to the directory number entered in the last column, or "Last" if the call is to be routed to the corresponding entry in the Call Rerouting Second Alternatives form. |
Normal |
Busy/DND TIE |
As with Busy/DND for DID calls |
Normal |
Busy/DND CO |
As with Busy/DND for DID calls |
Normal |
Busy/DND Int |
As with Busy/DND for DID calls |
Normal |
No Answer DID |
Set the call routing when the called number does not answer. Select "Normal" to allow the system to route the call to busy or reorder tone, "This" to route the call to the directory number entered in the last column, or "Last" if the call is to be routed to the corresponding entry in the Call Rerouting Second Alternatives form. NOTE: The Call Forward No Answer timer in the Class of Service of the called station determines how long the called station rings before rerouting to the first alternative if "This" is specified. The Call Rerouting Timer controls rerouting to the second alternative if "Last" is specified. |
Normal |
No Answer TIE |
As with No Answer for DID calls |
Normal |
No Answer CO |
As with No Answer for DID calls |
Normal |
No Answer Int |
As with No Answer for DID calls |
Normal |
Directory Number |
Enter the directory number to which the call is to be routed. The directory number may be any station, speed call, hunt group pilot number, ring group pilot number, personal ring roup pilot number, or attendant console answer point. |
Blank |
Comment |
(Optional) Enter a comment (a maximum of 26 ASCII characters) on the entry. |
Blank |